qmk_firmware/keyboards/crkbd/keymaps/hvp/keymap.c
hvp 162dd3fe19 [Keymap] Corne keyap with tap dance Swedish support (#6857)
* Adding profile for Corne with tap dance Swedish support.

* Remove extern keymap_config_t keymap_config as no longer needed

* Changed to use tap_code over register_code

* Removed persistent_default_layer_set

* Moved macros to hvp user space ink tap dance code

* Removed not used functions

* Moved to an ifbased include statement

* Removed not needed characters
2019-10-16 10:44:43 -07:00

183 lines
No EOL
7.4 KiB
C

#include QMK_KEYBOARD_H
#include "hvp.c"
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 3
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT( \
//,-----------------------------------------. ,-----------------------------------------.
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LT(_ADJUST, KC_ESC), KC_A, KC_S, KC_D, LT(_RAISE,KC_F), MT(MOD_LCTL,KC_G), KC_H, KC_J, KC_K, KC_L,TD(TD1),TD(TD2),\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM,KC_DOT,TD(TD3),KC_SFTENT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT( \
//,-----------------------------------------. ,-----------------------------------------.
KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT,KC_NO, KC_DEL,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO, KC_NO,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT( \
//,-----------------------------------------. ,-----------------------------------------.
KC_TAB,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT( \
//,-----------------------------------------. ,-----------------------------------------.
KC_F1,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
RESET,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_MPLY, KC_MNXT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \
//`--------------------' `--------------------'
)
};
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
// const char *read_mode_icon(bool swap);
// const char *read_host_led_state(void);
// void set_timelog(void);
// const char *read_timelog(void);
void matrix_scan_user(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
//matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
} else {
matrix_write(matrix, read_logo());
}
}
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
}
#endif//SSD1306OLED
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef SSD1306OLED
set_keylog(keycode, record);
#endif
// set_timelog();
}
switch (keycode) {
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}