qmk_firmware/quantum/split_common/transport.c
James Young 1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00

452 lines
15 KiB
C

#include <string.h>
#include <stddef.h>
#include "config.h"
#include "matrix.h"
#include "quantum.h"
#define ROWS_PER_HAND (MATRIX_ROWS / 2)
#define SYNC_TIMER_OFFSET 2
#ifdef RGBLIGHT_ENABLE
# include "rgblight.h"
#endif
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
#endif
#ifdef ENCODER_ENABLE
# include "encoder.h"
static pin_t encoders_pad[] = ENCODERS_PAD_A;
# define NUMBER_OF_ENCODERS (sizeof(encoders_pad) / sizeof(pin_t))
#endif
#if defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT)
# include "led_matrix.h"
#endif
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
# include "rgb_matrix.h"
#endif
#if defined(USE_I2C)
# include "i2c_master.h"
# include "i2c_slave.h"
typedef struct _I2C_slave_buffer_t {
# ifndef DISABLE_SYNC_TIMER
uint32_t sync_timer;
# endif
# ifdef SPLIT_TRANSPORT_MIRROR
matrix_row_t mmatrix[ROWS_PER_HAND];
# endif
matrix_row_t smatrix[ROWS_PER_HAND];
# ifdef SPLIT_MODS_ENABLE
uint8_t real_mods;
uint8_t weak_mods;
# ifndef NO_ACTION_ONESHOT
uint8_t oneshot_mods;
# endif
# endif
# ifdef BACKLIGHT_ENABLE
uint8_t backlight_level;
# endif
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
rgblight_syncinfo_t rgblight_sync;
# endif
# ifdef ENCODER_ENABLE
uint8_t encoder_state[NUMBER_OF_ENCODERS];
# endif
# ifdef WPM_ENABLE
uint8_t current_wpm;
# endif
# if defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT)
led_eeconfig_t led_matrix;
bool led_suspend_state;
# endif
# if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
rgb_config_t rgb_matrix;
bool rgb_suspend_state;
# endif
} I2C_slave_buffer_t;
static I2C_slave_buffer_t *const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_reg;
# define I2C_SYNC_TIME_START offsetof(I2C_slave_buffer_t, sync_timer)
# define I2C_KEYMAP_MASTER_START offsetof(I2C_slave_buffer_t, mmatrix)
# define I2C_KEYMAP_SLAVE_START offsetof(I2C_slave_buffer_t, smatrix)
# define I2C_REAL_MODS_START offsetof(I2C_slave_buffer_t, real_mods)
# define I2C_WEAK_MODS_START offsetof(I2C_slave_buffer_t, weak_mods)
# define I2C_ONESHOT_MODS_START offsetof(I2C_slave_buffer_t, oneshot_mods)
# define I2C_BACKLIGHT_START offsetof(I2C_slave_buffer_t, backlight_level)
# define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync)
# define I2C_ENCODER_START offsetof(I2C_slave_buffer_t, encoder_state)
# define I2C_WPM_START offsetof(I2C_slave_buffer_t, current_wpm)
# define I2C_LED_MATRIX_START offsetof(I2C_slave_buffer_t, led_matrix)
# define I2C_LED_SUSPEND_START offsetof(I2C_slave_buffer_t, led_suspend_state)
# define I2C_RGB_MATRIX_START offsetof(I2C_slave_buffer_t, rgb_matrix)
# define I2C_RGB_SUSPEND_START offsetof(I2C_slave_buffer_t, rgb_suspend_state)
# define TIMEOUT 100
# ifndef SLAVE_I2C_ADDRESS
# define SLAVE_I2C_ADDRESS 0x32
# endif
// Get rows from other half over i2c
bool transport_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_SLAVE_START, (void *)slave_matrix, sizeof(i2c_buffer->smatrix), TIMEOUT);
# ifdef SPLIT_TRANSPORT_MIRROR
i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_MASTER_START, (void *)master_matrix, sizeof(i2c_buffer->mmatrix), TIMEOUT);
# endif
// write backlight info
# ifdef BACKLIGHT_ENABLE
uint8_t level = is_backlight_enabled() ? get_backlight_level() : 0;
if (level != i2c_buffer->backlight_level) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIGHT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) {
i2c_buffer->backlight_level = level;
}
}
# endif
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
if (rgblight_get_change_flags()) {
rgblight_syncinfo_t rgblight_sync;
rgblight_get_syncinfo(&rgblight_sync);
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_START, (void *)&rgblight_sync, sizeof(rgblight_sync), TIMEOUT) >= 0) {
rgblight_clear_change_flags();
}
}
# endif
# ifdef ENCODER_ENABLE
i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)i2c_buffer->encoder_state, sizeof(i2c_buffer->encoder_state), TIMEOUT);
encoder_update_raw(i2c_buffer->encoder_state);
# endif
# ifdef WPM_ENABLE
uint8_t current_wpm = get_current_wpm();
if (current_wpm != i2c_buffer->current_wpm) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_WPM_START, (void *)&current_wpm, sizeof(current_wpm), TIMEOUT) >= 0) {
i2c_buffer->current_wpm = current_wpm;
}
}
# endif
# ifdef SPLIT_MODS_ENABLE
uint8_t real_mods = get_mods();
if (real_mods != i2c_buffer->real_mods) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_REAL_MODS_START, (void *)&real_mods, sizeof(real_mods), TIMEOUT) >= 0) {
i2c_buffer->real_mods = real_mods;
}
}
uint8_t weak_mods = get_weak_mods();
if (weak_mods != i2c_buffer->weak_mods) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_WEAK_MODS_START, (void *)&weak_mods, sizeof(weak_mods), TIMEOUT) >= 0) {
i2c_buffer->weak_mods = weak_mods;
}
}
# ifndef NO_ACTION_ONESHOT
uint8_t oneshot_mods = get_oneshot_mods();
if (oneshot_mods != i2c_buffer->oneshot_mods) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_ONESHOT_MODS_START, (void *)&oneshot_mods, sizeof(oneshot_mods), TIMEOUT) >= 0) {
i2c_buffer->oneshot_mods = oneshot_mods;
}
}
# endif
# endif
# if defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT)
i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_LED_MATRIX_START, (void *)led_matrix_eeconfig, sizeof(i2c_buffer->led_matrix), TIMEOUT);
bool suspend_state = led_matrix_get_suspend_state();
i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_LED_SUSPEND_START, (void *)suspend_state, sizeof(i2c_buffer->led_suspend_state), TIMEOUT);
# endif
# if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_MATRIX_START, (void *)rgb_matrix_config, sizeof(i2c_buffer->rgb_matrix), TIMEOUT);
bool suspend_state = rgb_matrix_get_suspend_state();
i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_SUSPEND_START, (void *)suspend_state, sizeof(i2c_buffer->rgb_suspend_state), TIMEOUT);
# endif
# ifndef DISABLE_SYNC_TIMER
i2c_buffer->sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET;
i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_SYNC_TIME_START, (void *)&i2c_buffer->sync_timer, sizeof(i2c_buffer->sync_timer), TIMEOUT);
# endif
return true;
}
void transport_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
# ifndef DISABLE_SYNC_TIMER
sync_timer_update(i2c_buffer->sync_timer);
# endif
// Copy matrix to I2C buffer
memcpy((void *)i2c_buffer->smatrix, (void *)slave_matrix, sizeof(i2c_buffer->smatrix));
# ifdef SPLIT_TRANSPORT_MIRROR
memcpy((void *)master_matrix, (void *)i2c_buffer->mmatrix, sizeof(i2c_buffer->mmatrix));
# endif
// Read Backlight Info
# ifdef BACKLIGHT_ENABLE
backlight_set(i2c_buffer->backlight_level);
# endif
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
// Update the RGB with the new data
if (i2c_buffer->rgblight_sync.status.change_flags != 0) {
rgblight_update_sync(&i2c_buffer->rgblight_sync, false);
i2c_buffer->rgblight_sync.status.change_flags = 0;
}
# endif
# ifdef ENCODER_ENABLE
encoder_state_raw(i2c_buffer->encoder_state);
# endif
# ifdef WPM_ENABLE
set_current_wpm(i2c_buffer->current_wpm);
# endif
# ifdef SPLIT_MODS_ENABLE
set_mods(i2c_buffer->real_mods);
set_weak_mods(i2c_buffer->weak_mods);
# ifndef NO_ACTION_ONESHOT
set_oneshot_mods(i2c_buffer->oneshot_mods);
# endif
# endif
# if defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT)
memcpy((void *)i2c_buffer->led_matrix, (void *)led_matrix_eeconfig, sizeof(i2c_buffer->led_matrix));
led_matrix_set_suspend_state(i2c_buffer->led_suspend_state);
# endif
# if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
memcpy((void *)i2c_buffer->rgb_matrix, (void *)rgb_matrix_config, sizeof(i2c_buffer->rgb_matrix));
rgb_matrix_set_suspend_state(i2c_buffer->rgb_suspend_state);
# endif
}
void transport_master_init(void) { i2c_init(); }
void transport_slave_init(void) { i2c_slave_init(SLAVE_I2C_ADDRESS); }
#else // USE_SERIAL
# include "serial.h"
typedef struct _Serial_s2m_buffer_t {
// TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
matrix_row_t smatrix[ROWS_PER_HAND];
# ifdef ENCODER_ENABLE
uint8_t encoder_state[NUMBER_OF_ENCODERS];
# endif
} Serial_s2m_buffer_t;
typedef struct _Serial_m2s_buffer_t {
# ifdef SPLIT_MODS_ENABLE
uint8_t real_mods;
uint8_t weak_mods;
# ifndef NO_ACTION_ONESHOT
uint8_t oneshot_mods;
# endif
# endif
# ifndef DISABLE_SYNC_TIMER
uint32_t sync_timer;
# endif
# ifdef SPLIT_TRANSPORT_MIRROR
matrix_row_t mmatrix[ROWS_PER_HAND];
# endif
# ifdef BACKLIGHT_ENABLE
uint8_t backlight_level;
# endif
# ifdef WPM_ENABLE
uint8_t current_wpm;
# endif
# if defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT)
led_eeconfig_t led_matrix;
bool led_suspend_state;
# endif
# if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
rgb_config_t rgb_matrix;
bool rgb_suspend_state;
# endif
} Serial_m2s_buffer_t;
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
// When MCUs on both sides drive their respective RGB LED chains,
// it is necessary to synchronize, so it is necessary to communicate RGB
// information. In that case, define RGBLIGHT_SPLIT with info on the number
// of LEDs on each half.
//
// Otherwise, if the master side MCU drives both sides RGB LED chains,
// there is no need to communicate.
typedef struct _Serial_rgblight_t {
rgblight_syncinfo_t rgblight_sync;
} Serial_rgblight_t;
volatile Serial_rgblight_t serial_rgblight = {};
uint8_t volatile status_rgblight = 0;
# endif
volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
uint8_t volatile status0 = 0;
enum serial_transaction_id {
GET_SLAVE_MATRIX = 0,
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
PUT_RGBLIGHT,
# endif
};
SSTD_t transactions[] = {
[GET_SLAVE_MATRIX] =
{
(uint8_t *)&status0,
sizeof(serial_m2s_buffer),
(uint8_t *)&serial_m2s_buffer,
sizeof(serial_s2m_buffer),
(uint8_t *)&serial_s2m_buffer,
},
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
[PUT_RGBLIGHT] =
{
(uint8_t *)&status_rgblight, sizeof(serial_rgblight), (uint8_t *)&serial_rgblight, 0, NULL // no slave to master transfer
},
# endif
};
void transport_master_init(void) { soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
void transport_slave_init(void) { soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
// rgblight synchronization information communication.
void transport_rgblight_master(void) {
if (rgblight_get_change_flags()) {
rgblight_get_syncinfo((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync);
if (soft_serial_transaction(PUT_RGBLIGHT) == TRANSACTION_END) {
rgblight_clear_change_flags();
}
}
}
void transport_rgblight_slave(void) {
if (status_rgblight == TRANSACTION_ACCEPTED) {
rgblight_update_sync((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync, false);
status_rgblight = TRANSACTION_END;
}
}
# else
# define transport_rgblight_master()
# define transport_rgblight_slave()
# endif
bool transport_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
# ifndef SERIAL_USE_MULTI_TRANSACTION
if (soft_serial_transaction() != TRANSACTION_END) {
return false;
}
# else
transport_rgblight_master();
if (soft_serial_transaction(GET_SLAVE_MATRIX) != TRANSACTION_END) {
return false;
}
# endif
// TODO: if MATRIX_COLS > 8 change to unpack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
slave_matrix[i] = serial_s2m_buffer.smatrix[i];
# ifdef SPLIT_TRANSPORT_MIRROR
serial_m2s_buffer.mmatrix[i] = master_matrix[i];
# endif
}
# ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
serial_m2s_buffer.backlight_level = is_backlight_enabled() ? get_backlight_level() : 0;
# endif
# ifdef ENCODER_ENABLE
encoder_update_raw((uint8_t *)serial_s2m_buffer.encoder_state);
# endif
# ifdef WPM_ENABLE
// Write wpm to slave
serial_m2s_buffer.current_wpm = get_current_wpm();
# endif
# ifdef SPLIT_MODS_ENABLE
serial_m2s_buffer.real_mods = get_mods();
serial_m2s_buffer.weak_mods = get_weak_mods();
# ifndef NO_ACTION_ONESHOT
serial_m2s_buffer.oneshot_mods = get_oneshot_mods();
# endif
# endif
# if defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT)
serial_m2s_buffer.led_matrix = led_matrix_eeconfig;
serial_m2s_buffer.led_suspend_state = led_matrix_get_suspend_state();
# endif
# if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
serial_m2s_buffer.rgb_matrix = rgb_matrix_config;
serial_m2s_buffer.rgb_suspend_state = rgb_matrix_get_suspend_state();
# endif
# ifndef DISABLE_SYNC_TIMER
serial_m2s_buffer.sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET;
# endif
return true;
}
void transport_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
transport_rgblight_slave();
# ifndef DISABLE_SYNC_TIMER
sync_timer_update(serial_m2s_buffer.sync_timer);
# endif
// TODO: if MATRIX_COLS > 8 change to pack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_s2m_buffer.smatrix[i] = slave_matrix[i];
# ifdef SPLIT_TRANSPORT_MIRROR
master_matrix[i] = serial_m2s_buffer.mmatrix[i];
# endif
}
# ifdef BACKLIGHT_ENABLE
backlight_set(serial_m2s_buffer.backlight_level);
# endif
# ifdef ENCODER_ENABLE
encoder_state_raw((uint8_t *)serial_s2m_buffer.encoder_state);
# endif
# ifdef WPM_ENABLE
set_current_wpm(serial_m2s_buffer.current_wpm);
# endif
# ifdef SPLIT_MODS_ENABLE
set_mods(serial_m2s_buffer.real_mods);
set_weak_mods(serial_m2s_buffer.weak_mods);
# ifndef NO_ACTION_ONESHOT
set_oneshot_mods(serial_m2s_buffer.oneshot_mods);
# endif
# endif
# if defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT)
led_matrix_eeconfig = serial_m2s_buffer.led_matrix;
led_matrix_set_suspend_state(serial_m2s_buffer.led_suspend_state);
# endif
# if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
rgb_matrix_config = serial_m2s_buffer.rgb_matrix;
rgb_matrix_set_suspend_state(serial_m2s_buffer.rgb_suspend_state);
# endif
}
#endif