History

Drashna Jaelre 678fae6cce Reformat 40% Ortho boards to work with Layouts feature (#2804 ) * Reformat 40% Ortho boards to work with Layouts feature * Fix krusli keymap to compile properly * Fix mt40 compile errors * Fix layouts * fix RGB?		2018-05-14 10:11:12 -04:00
..
keymaps	Reformat 40% Ortho boards to work with Layouts feature (#2804 )	2018-05-14 10:11:12 -04:00
tools
backlight.c
backlight_custom.h
breathing_custom.h
config.h
i2c.c
i2c.h
jj40.c
jj40.h	Reformat 40% Ortho boards to work with Layouts feature (#2804 )	2018-05-14 10:11:12 -04:00
matrix.c
README.md	Updated personal keymaps, fixed Let's Split default keymap, updated JJ40 README (#2704 )	2018-04-19 09:28:55 -07:00
rules.mk	Reformat 40% Ortho boards to work with Layouts feature (#2804 )	2018-05-14 10:11:12 -04:00
usbconfig.h

README.md

jj40

A compact 40% (12x4) ortholinear keyboard kit made and KPRepublic on AliExpress.

Keyboard Maintainer: QMK Community
Hardware Supported: Atmega32A
Hardware Availability: AliExpress

Make example for this keyboard (after setting up your build environment):

make jj40:default:program

See build environment setup then the make instructions for more information.

Note that this is a complete replacement for the firmware, so you won't be using Bootmapper Client to change any keyboard settings, since not all the USB report options are supported.

In addition you may need the AVR toolchain and bootloadHID (GitHub repo) for flashing:

For macOS:

$ brew cask install crosspack-avr
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

For Linux:

$ sudo apt install libusb-dev
$ wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz
$ tar -xzf bootloadHID.2012-12-08.tar.gz
$ cd bootloadHID.2012-12-08/commandline
$ make
$ sudo cp bootloadHID /usr/bin

In order to use the ./program script, which can reboot the board into the bootloader, you'll need Python 2 with PyUSB installed:

$ pip install pyusb

If you prefer (or are having issues with a program flash), you can just build it (make jj40:<keymap-name> and flash the firmware (.hex file) directly with bootloadHID if you boot the board while holding down Backspace (Top Right Key) to keep it in the bootloader:

$ make jj40
$ bootloadHID -r jj40_default.hex

Troubleshooting

Try plugging the board in while pressing Backspace (Top Right Key). This will force it to boot only the bootloader without loading the firmware. Once this is done, just reflash the board with the original firmware.
Sometimes USB hubs can act weird, so try connecting the board directly to your computer or plugging/unplugging the USB hub.
If you get an error such as "Resource Unavailable" when attemting to flash on Linux, you may want to compile and run tools/usb_detach.c. See tools/README.md for more info.