qmk_firmware/keyboards/lets_split
Xyverz 27e3458f44 Updating my maps in upstream master (#2987)
* Adding Rama M10-A Macropad

* ch-ch-ch changes...

* Major overhaul based on SMT's keymap.

* more changes.

* Moved the FKeys to the ADJUST layer.

* More rearranging.

* Alias in Atreus62 keymap to make it more legible
Added config.h to fix tapping_term issue for Caps Lock key in OSX

* Added OrthoDox layout.

* More layout changes.

* Fixing things with the keyboard.

* Finishing touches.

Set left-hand master in config.h
Embedded the arrow keys in keymap.c

* Revised keymap making this easier to use.

* additions and changes.

* changes to various keymaps.

* Minor adjustments to OrthoDox layout.

* Added Eco keymap. Updated Let's Split keymap.

* Added gherkin

* Removed my M10A keymap

* Planck Keymap Updates

Updated my Planck keymap and created a simple keymap for Seph's Preonic.

* Added readme

* readme fixes

* Update readme.md

more clarification

* Keymap Tweaks

Removed the Power button setting from the keymap. It was in a
horrible location. I'll work on getting it setup somewhere else
sometime later.

* Added Readme

I finally got around to adding a readme to this keymap. I've also added minor changes to the layout.

* Fixed Keymap Error

* Fixed Readme

* adding iris and levinson keymaps

* Tweaks to keymap

* added youngJZ keymap

* Changes to keymap
Added a readme.md

* Levinson changes

Added the readme.md and rules.mk files.
Configured RGB underglow and backlighting.

* fixed readme

* changes to keymaps

* Updated keymap

* Updated readme.md

* Updated Readme (again)

* Updated Readme

Fixed formatting. Again.

* Updated readme

This is the last readme update for this keyboard update. I hope.

* Added Contra keymap

* Kinesis Keymap Update

* Updated Keymaps

I've updated my Kinesis (Stapelberg) layout and my Clueboard 66 layout.
I've also updated my Kinesis Readme.

* Clueboard Keymap update

Added media keys to my Clueboard 66 Rev2 layout.

* Added keymap

Added Minidox keymap & rules.
Added user function to Let's Split keymap that turns off the red
 LEDs on the Pro Micros.

* New Zen keymap

Added Zen keyboard to my list of keyboards, so had to generate a new
keymap for it.

Also adding some changes to my MiniDox keymap and config.h, as well
as my Levinson's config.h.

The config.h file changes enable ee_hands.

* A few changes for useability

I made a few changes to the Minidox keymap to see if I can't make it more useable.

I'm also working on streamlining the Zen keyboard keymap to reduce layers.

* Re-vamped Iris keymap.

* changes

* minor keymap change

This was a minor keymap change to use mod_tap for the backspace key:
ALT when held, BSPC when tapped.

* Added Fourier keymap

* Keymap Cleanup

Moved KC_ESC to KC_CAPS, and changed KC_ESC to KC_GRV
This is because of muscle memory, I kept hitting ESC when trying to hit TAB.

* Keymap Adjustments

Swapped Caps/Esc, put Caps in Raise/Lower layers, put Grv in normal
Esc position. Adjusted the readme.md to reflect these changes.

* minor tweaks

Added code to disable red ProMicro LEDs after flashing.

* Clean-up

* Corrections to keymap.

Fixed a foul-up in the Zen keymap where the lctrl was where the LOWER
should have been.

* Changes to make this fall in line with the new Layout features

* Moving to LAYOUTs for 4x12 boards

* fixed config.h file

* standardization changes

* Reverted Atreus62 keymap to LAYOUT format

* Switch Preonic and Nyquist to ortho_5x12

* Corrections to config.h

* config.h file tweaks

* config.h file tweaks
2018-05-18 15:32:50 -07:00
..
keymaps Updating my maps in upstream master (#2987) 2018-05-18 15:32:50 -07:00
rev1 More Configurator Warning Fixes (#2716) 2018-04-07 23:32:14 -07:00
rev2 More Configurator Warning Fixes (#2716) 2018-04-07 23:32:14 -07:00
sockets More Configurator Warning Fixes (#2716) 2018-04-07 23:32:14 -07:00
config.h fix up lets_split keymaps 2017-11-14 17:37:57 -05:00
eeprom-lefthand.eep convert to unix line-endings [skip ci] 2017-08-30 15:55:39 +00:00
eeprom-righthand.eep convert to unix line-endings [skip ci] 2017-08-30 15:55:39 +00:00
i2c.c
i2c.h
lets_split.c Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
lets_split.h Reformat 40% Ortho boards to work with Layouts feature (#2804) 2018-05-14 10:11:12 -04:00
matrix.c Remove _quantum functions from custom matrix.c code 2018-02-06 12:25:30 -05:00
readme.md Fixed dead links (#2451) 2018-03-01 07:45:47 -08:00
rules.mk Normacos keymap for let's split keyboard (#2691) 2018-04-08 11:14:41 -07:00
serial.c Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
serial.h
split_util.c Changes lets_split to use timer based debouncing 2017-07-29 11:38:00 -04:00
split_util.h Port #1576 to Let's Split: EECONFIG_HANDEDNESS gets overridden when RGB is enabled 2017-08-30 11:51:58 -04:00

Let's Split

This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/

Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 based boards.

Hardware files for the Let's Split are now stored at http://qmk.fm/lets_split/ Hardware files for the sockets version can be found at https://github.com/dumle29/let-s-Split-v2/tree/socket-reverseable

Build Guide

A build guide for putting together the Let's Split v2 can be found here: An Overly Verbose Guide to Building a Let's Split Keyboard

There is additional information there about flashing and adding RGB underglow.

A build guide for putting together the sockets version can be found here: Guide will be made and linked here when the PCBs have been received and tested

First Time Setup

Download or clone the qmk_firmware repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:

$ make lets_split/rev2:default

You will see a lot of output and if everything worked correctly you will see the built hex file:

lets_split_rev2_default.hex

If you would like to use one of the alternative keymaps, or create your own, copy one of the existing keymaps and run make like so:

$ make lets_split/rev2:YOUR_KEYMAP_NAME

If everything worked correctly you will see a file:

lets_split_rev2_YOUR_KEYMAP_NAME.hex

For more information on customizing keymaps, take a look at the primary documentation for Customizing Your Keymap in the main readme.md.

Let's split 1.0

If you have a first generation Let's Split you will need to use the revision 1 code. To do so, use rev1 in all your commands instead.

Features

For the full Quantum Mechanical Keyboard feature list, see the parent readme.md.

Some features supported by the firmware:

  • Either half can connect to the computer via USB, or both halves can be used independently.
  • You only need 3 wires to connect the two halves. Two for VCC and GND and one for serial communication.
  • Optional support for I2C connection between the two halves if for some reason you require a faster connection between the two halves. Note this requires an extra wire between halves and pull-up resistors on the data lines.

Required Hardware

Apart from diodes and key switches for the keyboard matrix in each half, you will need:

  • 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
  • 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable

Alternatively, you can use any sort of cable and socket that has at least 3 wires. If you want to use I2C to communicate between halves, you will need a cable with at least 4 wires and 2x 4.7kΩ pull-up resistors

Optional Hardware

A speaker can be hooked-up to either side to the 5 (C6) pin and GND, and turned on via AUDIO_ENABLE.

Wiring

The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. PD0 on the ATmega32u4) between the two Pro Micros.

Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro and modify the matrix.c accordingly.

The wiring for serial:

serial wiring

The wiring for i2c:

i2c wiring

The pull-up resistors may be placed on either half. It is also possible to use 4 resistors and have the pull-ups in both halves, but this is unnecessary in simple use cases.

You can change your configuration between serial and i2c by modifying your config.h file.

Notes on Software Configuration

Configuring the firmware is similar to any other QMK project. One thing to note is that MATRIX_ROWS in config.h is the total number of rows between the two halves, i.e. if your split keyboard has 4 rows in each half, then use MATRIX_ROWS=8.

Also, the current implementation assumes a maximum of 8 columns, but it would not be very difficult to adapt it to support more if required.

Flashing

From the top level qmk_firmware directory run make KEYBOARD:KEYMAP:avrdude for automatic serial port resolution and flashing. Example: make lets_split/rev2:default:avrdude

Choosing which board to plug the USB cable into (choosing Master)

Because the two boards are identical, the firmware has logic to differentiate the left and right board.

It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.

The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.

The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.

Setting the left hand as master

If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out EE_HANDS and comment out I2C_MASTER_RIGHT or MASTER_RIGHT if for some reason it was set.

Setting the right hand as master

If you always plug the usb cable into the right board, add an extra flag to your config.h

 #define MASTER_RIGHT

Setting EE_hands to use either hands as master

If you define EE_HANDS in your config.h, you will need to set the EEPROM for the left and right halves.

The EEPROM is used to store whether the half is left handed or right handed. This makes it so that the same firmware file will run on both hands instead of having to flash left and right handed versions of the firmware to each half. To flash the EEPROM file for the left half run:

avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
// or the equivalent in dfu-programmer

and similarly for right half

avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
// or the equivalent in dfu-programmer

NOTE: replace $(COM_PORT) with the port of your device (e.g. /dev/ttyACM0)

After you have flashed the EEPROM, you then need to set EE_HANDS in your config.h, rebuild the hex files and reflash.

Note that you need to program both halves, but you have the option of using different keymaps for each half. You could program the left half with a QWERTY layout and the right half with a Colemak layout using bootmagic's default layout option. Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the right half is connected.

Notes on Using Pro Micro 3.3V

Do update the F_CPU parameter in rules.mk to 8000000 which reflects the frequency on the 3.3V board.

Also, if the slave board is producing weird characters in certain columns, update the following line in matrix.c to the following:

// _delay_us(30);  // without this wait read unstable value.
_delay_us(300);  // without this wait read unstable value.