qmk_firmware/keyboards/hadron/ver3/config.h

110 lines
3.3 KiB
C

/*
* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
//Audio
#undef AUDIO_VOICES
#undef AUDIO_PIN
#define AUDIO_PIN A5
#define AUDIO_PIN_ALT A4
#define AUDIO_PIN_ALT_AS_NEGATIVE
#ifdef AUDIO_ENABLE
#define STARTUP_SONG SONG(PLANCK_SOUND)
// #define STARTUP_SONG SONG(NO_SOUND)
#define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
SONG(COLEMAK_SOUND), \
SONG(DVORAK_SOUND) \
}
#define AUDIO_CLICKY
/* to enable clicky on startup */
//#define AUDIO_CLICKY_ON
#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f
#endif
// configure oled driver for the 128x32 oled
#define OLED_UPDATE_INTERVAL 33 // ~30fps
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* Haptic Driver initialization settings
* Feedback Control Settings */
#define DRV2605L_FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
#define DRV2605L_FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
#define DRV2605L_FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
/* default 3V ERM vibration motor voltage and library*/
#if DRV2605L_FB_ERM_LRA == 0
#define DRV2605L_RATED_VOLTAGE 3
#define DRV2605L_V_RMS 2.3
#define DRV2605L_V_PEAK 3.30
/* Library Selection */
#define DRV2605L_LIBRARY 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
/* default 2V LRA voltage and library */
#elif DRV2605L_FB_ERM_LRA == 1
#define DRV2605L_RATED_VOLTAGE 2
#define DRV2605L_V_RMS 2.0
#define DRV2605L_V_PEAK 2.85
#define DRV2605L_F_LRA 200
/* Library Selection */
#define DRV2605L_LIBRARY 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
#endif
/* Control 1 register settings */
#define DRV2605L_DRIVE_TIME 25
#define DRV2605L_AC_COUPLE 0
#define DRV2605L_STARTUP_BOOST 1
/* Control 2 Settings */
#define DRV2605L_BIDIR_INPUT 1
#define DRV2605L_BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
#define DRV2605L_SAMPLE_TIME 3
#define DRV2605L_BLANKING_TIME 1
#define DRV2605L_IDISS_TIME 1
/* Control 3 settings */
#define DRV2605L_NG_THRESH 2
#define DRV2605L_ERM_OPEN_LOOP 1
#define DRV2605L_SUPPLY_COMP_DIS 0
#define DRV2605L_DATA_FORMAT_RTO 0
#define DRV2605L_LRA_DRIVE_MODE 0
#define DRV2605L_N_PWM_ANALOG 0
#define DRV2605L_LRA_OPEN_LOOP 0
/* Control 4 settings */
#define DRV2605L_ZC_DET_TIME 0
#define DRV2605L_AUTO_CAL_TIME 3
#define SOLENOID_PIN A14