Create generic Pointing Device Pin defines (#17776)

This commit is contained in:
Drashna Jaelre 2022-08-12 16:22:34 -07:00 committed by GitHub
parent 83f6aedd93
commit ccdba43e59
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
6 changed files with 80 additions and 40 deletions

View file

@ -22,11 +22,13 @@ POINTING_DEVICE_DRIVER = adns5050
The ADNS 5050 sensor uses a serial type protocol for communication, and requires an additional light source.
| Setting | Description |
| ------------------- | ------------------------------------------------------------------- |
| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. |
| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. |
| `ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. |
| Setting | Description | Default |
| ------------------- | ------------------------------------------------------------------- | -------------------------- |
| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` |
| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` |
| `ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. | `POINTING_DEVICE_CS_PIN` |
The CPI range is 125-1375, in increments of 125. Defaults to 500 CPI.
@ -41,12 +43,12 @@ POINTING_DEVICE_DRIVER = adns9800
The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surface tracking.
| Setting | Description | Default |
| ----------------------- | ---------------------------------------------------------------------- | ------------- |
| ----------------------- | ---------------------------------------------------------------------- | ------------------------ |
| `ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
| `ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
| `ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
| `ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
| `ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
| `ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` |
The CPI range is 800-8200, in increments of 200. Defaults to 1800 CPI.
@ -117,12 +119,12 @@ Default attenuation is set to 4X, although if you are using a thicker overlay (s
| `CIRQUE_PINNACLE_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `20` |
| SPI Setting | Description | Default |
| ------------------------------ | ---------------------------------------------------------------------- | ------------- |
| ------------------------------ | ---------------------------------------------------------------------- | ------------------------ |
| `CIRQUE_PINNACLE_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `1000000` |
| `CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
| `CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` |
| `CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
| `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
| `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` |
Default Scaling is 1024. Actual CPI depends on trackpad diameter.
@ -170,10 +172,10 @@ POINTING_DEVICE_DRIVER = paw3204
The paw 3204 sensor uses a serial type protocol for communication, and requires an additional light source.
| Setting | Description |
|--------------------|---------------------------------------------------------------------|
|`PAW3204_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. |
|`PAW3204_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. |
| Setting | Description | Default |
| ------------------ |--------------------------------------------------------------- | -------------------------- |
| `PAW3204_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` |
| `PAW3204_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` |
The CPI range is 400-1600, with supported values of (400, 500, 600, 800, 1000, 1200 and 1600). Defaults to 1000 CPI.
@ -218,8 +220,8 @@ The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI.
Both PMW 3360 and PMW 3389 are SPI driven optical sensors, that use a built in IR LED for surface tracking.
| Setting | Description | Default |
| ---------------------------- | ------------------------------------------------------------------------------------------- | ------------- |
| `PMW33XX_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
| ---------------------------- | ------------------------------------------------------------------------------------------- | ------------------------ |
| `PMW33XX_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` |
| `PMW33XX_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ |
| `PMW33XX_CPI` | (Optional) Sets counts per inch sensitivity of the sensor. | _varies_ |
| `PMW33XX_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
@ -290,9 +292,13 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {}
| `POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ |
| `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE` | (Optional) Enable inertial cursor. Cursor continues moving after a flick gesture and slows down by kinetic friction. | _not defined_ |
| `POINTING_DEVICE_GESTURES_SCROLL_ENABLE` | (Optional) Enable scroll gesture. The gesture that activates the scroll is device dependent. | _not defined_ |
| `POINTING_DEVICE_CS_PIN` | (Optional) Provides a default CS pin, useful for supporting multiple sensor configs. | _not defined_ |
| `POINTING_DEVICE_SDIO_PIN` | (Optional) Provides a default SDIO pin, useful for supporting multiple sensor configs. | _not defined_ |
| `POINTING_DEVICE_SCLK_PIN` | (Optional) Provides a default SCLK pin, useful for supporting multiple sensor configs. | _not defined_ |
!> When using `SPLIT_POINTING_ENABLE` the `POINTING_DEVICE_MOTION_PIN` functionality is not supported and `POINTING_DEVICE_TASK_THROTTLE_MS` will default to `1`. Increasing this value will increase transport performance at the cost of possible mouse responsiveness.
The `POINTING_DEVICE_CS_PIN`, `POINTING_DEVICE_SDIO_PIN`, and `POINTING_DEVICE_SCLK_PIN` provide a convenient way to define a single pin that can be used for an interchangeable sensor config. This allows you to have a single config, without defining each device. Each sensor allows for this to be overridden with their own defines.
!> Any pointing device with a lift/contact status can integrate inertial cursor feature into its driver, controlled by `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE`. e.g. PMW3360 can use Lift_Stat from Motion register. Note that `POINTING_DEVICE_MOTION_PIN` cannot be used with this feature; continuous polling of `get_report()` is needed to generate glide reports.

View file

@ -40,15 +40,27 @@
// Definitions for the ADNS serial line.
#ifndef ADNS5050_SCLK_PIN
# error "No clock pin defined -- missing ADNS5050_SCLK_PIN"
# ifdef POINTING_DEVICE_SCLK_PIN
# define ADNS5050_SCLK_PIN POINTING_DEVICE_SCLK_PIN
# else
# error "No clock pin defined -- missing POINTING_DEVICE_SCLK_PIN or ADNS5050_SCLK_PIN"
# endif
#endif
#ifndef ADNS5050_SDIO_PIN
# error "No data pin defined -- missing ADNS5050_SDIO_PIN"
# ifdef POINTING_DEVICE_SDIO_PIN
# define ADNS5050_SDIO_PIN POINTING_DEVICE_SDIO_PIN
# else
# error "No data pin defined -- missing POINTING_DEVICE_SDIO_PIN or ADNS5050_SDIO_PIN"
# endif
#endif
#ifndef ADNS5050_CS_PIN
# error "No chip select pin defined -- missing ADNS5050_CS_PIN"
# ifdef POINTING_DEVICE_CS_PIN
# define ADNS5050_CS_PIN POINTING_DEVICE_CS_PIN
# else
# error "No chip select pin defined -- missing POINTING_DEVICE_CS_PIN or ADNS5050_CS_PIN define"
# endif
#endif
typedef struct {

View file

@ -43,7 +43,11 @@
#endif
#ifndef ADNS9800_CS_PIN
# error "No chip select pin defined -- missing ADNS9800_CS_PIN"
# ifdef POINTING_DEVICE_CS_PIN
# define ADNS9800_CS_PIN POINTING_DEVICE_CS_PIN
# else
# error "No chip select pin defined -- missing POINTING_DEVICE_CS_PIN or ADNS9800_CS_PIN"
# endif
#endif
typedef struct {

View file

@ -78,7 +78,11 @@
# define CIRQUE_PINNACLE_SPI_DIVISOR 64
# endif
# ifndef CIRQUE_PINNACLE_SPI_CS_PIN
# error "No Chip Select pin has been defined -- missing CIRQUE_PINNACLE_SPI_CS_PIN define"
# ifdef POINTING_DEVICE_CS_PIN
# define CIRQUE_PINNACLE_SPI_CS_PIN POINTING_DEVICE_CS_PIN
# else
# error "No Chip Select pin has been defined -- missing POINTING_DEVICE_CS_PIN or CIRQUE_PINNACLE_SPI_CS_PIN define"
# endif
# endif
# endif
#endif

View file

@ -20,10 +20,18 @@
#include <stdbool.h>
#ifndef PAW3204_SCLK_PIN
# error "No clock pin defined -- missing PAW3204_SCLK_PIN"
# ifdef POINTING_DEVICE_SCLK_PIN
# define PAW3204_SCLK_PIN POINTING_DEVICE_SCLK_PIN
# else
# error "No clock pin defined -- missing POINTING_DEVICE_SCLK_PIN or PAW3204_SCLK_PIN"
# endif
#endif
#ifndef PAW3204_SDIO_PIN
# error "No data pin defined -- missing PAW3204_SDIO_PIN"
# ifdef POINTING_DEVICE_SDIO_PIN
# define PAW3204_SDIO_PIN POINTING_DEVICE_SDIO_PIN
# else
# error "No data pin defined -- missing POINTING_DEVICE_SDIO_PIN or PAW3204_SDIO_PIN"
# endif
#endif
typedef struct {

View file

@ -66,7 +66,13 @@ _Static_assert(sizeof((pmw33xx_report_t){0}.motion) == 1, "pmw33xx_report_t.moti
// Support single and plural spellings
#ifndef PMW33XX_CS_PINS
# ifndef PMW33XX_CS_PIN
# ifdef POINTING_DEVICE_CS_PIN
# define PMW33XX_CS_PIN POINTING_DEVICE_CS_PIN
# define PMW33XX_CS_PINS \
{ PMW33XX_CS_PIN }
# else
# error "No chip select pin defined -- missing PMW33XX_CS_PIN or PMW33XX_CS_PINS"
# endif
# else
# define PMW33XX_CS_PINS \
{ PMW33XX_CS_PIN }