diff --git a/data/mappings/info_config.hjson b/data/mappings/info_config.hjson
index c0417b8839..b61ca04071 100644
--- a/data/mappings/info_config.hjson
+++ b/data/mappings/info_config.hjson
@@ -164,7 +164,6 @@
     "RGBLIGHT_DEFAULT_SAT": {"info_key": "rgblight.default.sat", "value_type": "int"},
     "RGBLIGHT_DEFAULT_VAL": {"info_key": "rgblight.default.val", "value_type": "int"},
     "RGBLIGHT_DEFAULT_SPD": {"info_key": "rgblight.default.speed", "value_type": "int"},
-    "RGBW": {"info_key": "rgblight.rgbw", "value_type": "flag"},
 
     // Secure
     "SECURE_IDLE_TIMEOUT": {"info_key": "secure.idle_timeout", "value_type": "int"},
@@ -215,6 +214,7 @@
     "WS2812_DI_PIN": {"info_key": "ws2812.pin"},
     "WS2812_I2C_ADDRESS": {"info_key": "ws2812.i2c_address", "value_type": "hex"},
     "WS2812_I2C_TIMEOUT": {"info_key": "ws2812.i2c_timeout", "value_type": "int"},
+    "WS2812_RGBW": {"info_key": "ws2812.rgbw", "value_type": "flag"},
 
     "LAYOUTS": {"info_key": "layout_aliases", "value_type": "mapping"},
 
@@ -229,6 +229,7 @@
     "PREVENT_STUCK_MODIFIERS": {"info_key": "_invalid.prevent_stuck_mods", "invalid": true},
     "QMK_KEYS_PER_SCAN": {"info_key": "qmk.keys_per_scan", "value_type": "int", "deprecated": true},
     "RGB_DI_PIN": {"info_key": "rgblight.pin", "invalid": true, "replace_with": "WS2812_DI_PIN or APA102_DI_PIN"},
+    "RGBW": {"info_key": "rgblight.rgbw", "invalid": true, "replace_with": "WS2812_RGBW"},
     "RGB_DISABLE_WHEN_USB_SUSPENDED": {"info_key": "_invalid.rgb_matrix_sleep", "invalid": true, "replace_with": "RGB_MATRIX_SLEEP"},
     "RGBLIGHT_ANIMATIONS": {"info_key": "_invalid.rgblight.animations.all", "value_type": "flag", "invalid": true},
     "TAPPING_FORCE_HOLD": {"info_key": "tapping.force_hold", "value_type": "flag", "deprecated": true},
diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema
index 585c64777f..de01809b43 100644
--- a/data/schemas/keyboard.jsonschema
+++ b/data/schemas/keyboard.jsonschema
@@ -661,7 +661,10 @@
                     "$ref": "qmk.definitions.v1#/mcu_pin",
                     "$comment": "Deprecated: use ws2812.pin instead"
                 },
-                "rgbw": {"type": "boolean"},
+                "rgbw": {
+                    "type": "boolean",
+                    "$comment": "Deprecated: use ws2812.rgbw instead"
+                },
                 "saturation_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
                 "sleep": {"type": "boolean"},
                 "split": {"type": "boolean"},
@@ -937,6 +940,7 @@
                     "enum": ["bitbang", "custom", "i2c", "pwm", "spi", "vendor"]
                 },
                 "pin": {"$ref": "qmk.definitions.v1#/mcu_pin"},
+                "rgbw": {"type": "boolean"},
                 "i2c_address": {"$ref": "qmk.definitions.v1#/hex_number_2d"},
                 "i2c_timeout": {"$ref": "qmk.definitions.v1#/unsigned_int"}
             }
diff --git a/docs/config_options.md b/docs/config_options.md
index fca80e54fd..046429a587 100644
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -237,7 +237,7 @@ If you define these options you will enable the associated feature, which may in
   * units to step when in/decreasing saturation
 * `#define RGBLIGHT_VAL_STEP 12`
   * units to step when in/decreasing value (brightness)
-* `#define RGBW`
+* `#define WS2812_RGBW`
   * Enables RGBW LED support
 
 ## Mouse Key Options
diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md
index a6a89d1d00..ae37ceca92 100644
--- a/docs/feature_rgblight.md
+++ b/docs/feature_rgblight.md
@@ -6,7 +6,7 @@ QMK has the ability to control RGB LEDs attached to your keyboard. This is commo
 
 Some keyboards come with RGB LEDs preinstalled. Others must have them installed after the fact. See the [Hardware Modification](#hardware-modification) section for information on adding RGB lighting to your keyboard.
 
-Currently QMK supports the following addressable LEDs (however, the white LED in RGBW variants is not supported):
+Currently QMK supports the following addressable LEDs:
 
  * WS2811, WS2812, WS2812B, WS2812C, etc.
  * SK6812, SK6812MINI, SK6805
diff --git a/docs/reference_info_json.md b/docs/reference_info_json.md
index d1dc5d3bea..5b06e9a326 100644
--- a/docs/reference_info_json.md
+++ b/docs/reference_info_json.md
@@ -588,9 +588,6 @@ Configures the [RGB Lighting](feature_rgblight.md) feature.
     * `max_brightness`
         * The maximum value which the HSV "V" component is scaled to, from 0 to 255.
         * Default: `255`
-    * `rgbw`
-        * Enable RGBW LEDs.
-        * Default: `false`
     * `saturation_steps`
         * The number of saturation adjustment steps.
         * Default: `17`
@@ -855,3 +852,6 @@ Configures the [WS2812](ws2812_driver.md) driver.
     * `i2c_timeout`
         * The I²C timeout in milliseconds (`i2c` driver only).
         * Default: `100` (100 ms)
+    * `rgbw`
+        * Enable RGBW LEDs.
+        * Default: `false`
diff --git a/docs/ws2812_driver.md b/docs/ws2812_driver.md
index 006529cc8a..8851c042f0 100644
--- a/docs/ws2812_driver.md
+++ b/docs/ws2812_driver.md
@@ -33,6 +33,7 @@ Add the following to your `config.h`:
 |`WS2812_T0H`       |`350`                  |The length of a "0" bit's high phase in nanoseconds                                             |
 |`WS2812_TRST_US`   |`280`                  |The length of the reset phase in microseconds                                                   |
 |`WS2812_BYTE_ORDER`|`WS2812_BYTE_ORDER_GRB`|The byte order of the RGB data                                                                  |
+|`WS2812_RGBW`      |*Not defined*          |Enables RGBW support (except `i2c` driver)                                                      |
 
 ### Timing Adjustment :id=timing-adjustment
 
@@ -58,6 +59,27 @@ Where the byte order may be one of:
 |`RGB`     |WS2812B-2020                |
 |`BGR`     |TM1812                      |
 
+### RGBW Support :id=rgbw-support
+
+Rendering the color white with RGB LEDs is typically inconsistent due to inherent variations between each individual LED die. However, some WS2812 variants (such as SK6812RGBW) also possess a white LED along with the red, green, and blue channels, which allows for a more accurate white to be displayed.
+
+QMK can automatically convert the RGB data to be sent to the LEDs to mix in the white channel:
+
+```
+w = min(r, g, b)
+r -= w
+g -= w
+b -= w
+```
+
+Thus, an RGB triplet of `255,255,255` will simply turn on the white LED fully (`0,0,0,255`).
+
+To enable RGBW conversion, add the following to your `config.h`:
+
+```c
+#define WS2812_RGBW
+```
+
 ## Driver Configuration :id=driver-configuration
 
 Driver selection can be configured in `rules.mk` as `WS2812_DRIVER`, or in `info.json` as `ws2812.driver`. Valid values are `bitbang` (default), `i2c`, `spi`, `pwm`, `vendor`, or `custom`. See below for information on individual drivers.
diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h
index 8209c21dba..3688e00785 100644
--- a/keyboards/ergodox_ez/config.h
+++ b/keyboards/ergodox_ez/config.h
@@ -73,8 +73,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* fix space cadet rollover issue */
 #define DISABLE_SPACE_CADET_ROLLOVER
 
-#define RGBW
-
 /*
  * The debounce filtering reports a key/switch change directly,
  * without any extra delay. After that the debounce logic will filter
diff --git a/keyboards/ergodox_ez/info.json b/keyboards/ergodox_ez/info.json
index f2495a409c..a560e97a0b 100644
--- a/keyboards/ergodox_ez/info.json
+++ b/keyboards/ergodox_ez/info.json
@@ -27,7 +27,8 @@
         "debounce_type": "sym_eager_pr"
     },
     "ws2812": {
-        "pin": "D7"
+        "pin": "D7",
+        "rgbw": true
     },
     "rgb_matrix": {
         "animations": {
diff --git a/keyboards/ergodox_ez/shine/rgblight_custom.c b/keyboards/ergodox_ez/shine/rgblight_custom.c
index feac50cba0..29060e76fc 100644
--- a/keyboards/ergodox_ez/shine/rgblight_custom.c
+++ b/keyboards/ergodox_ez/shine/rgblight_custom.c
@@ -25,7 +25,7 @@ void setleds_custom(rgb_led_t *led, uint16_t led_num) {
     uint16_t length = 0;
     int i = 0;
     int j = 0;
-#    ifdef RGBW
+#    ifdef WS2812_RGBW
     int bytes_per_led = 4;
 #    else
     int bytes_per_led = 3;
@@ -52,7 +52,7 @@ void setleds_custom(rgb_led_t *led, uint16_t led_num) {
         data[j++] = data_byte[0];
         data[j++] = data_byte[1];
         data[j++] = data_byte[2];
-#ifdef RGBW
+#ifdef WS2812_RGBW
         data[j++] = data_byte[3];
 #endif
     }
diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h
index 7c77f53a82..dcbcfeaaa8 100644
--- a/keyboards/handwired/tennie/config.h
+++ b/keyboards/handwired/tennie/config.h
@@ -17,8 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define RGBW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/handwired/tennie/keyboard.json b/keyboards/handwired/tennie/keyboard.json
index 34e6676c95..36c1266d50 100644
--- a/keyboards/handwired/tennie/keyboard.json
+++ b/keyboards/handwired/tennie/keyboard.json
@@ -26,7 +26,8 @@
         }
     },
     "ws2812": {
-        "pin": "D1"
+        "pin": "D1",
+        "rgbw": true
     },
     "features": {
         "bootmagic": true,
diff --git a/keyboards/oddforge/vea/ws2812_custom.c b/keyboards/oddforge/vea/ws2812_custom.c
index a037b88b3e..317f98130b 100644
--- a/keyboards/oddforge/vea/ws2812_custom.c
+++ b/keyboards/oddforge/vea/ws2812_custom.c
@@ -1,7 +1,7 @@
 #include "ws2812.h"
 #include "i2c_master.h"
 
-#ifdef RGBW
+#ifdef WS2812_RGBW
 #    error "RGBW not supported"
 #endif
 
diff --git a/keyboards/rgbkb/pan/pan.c b/keyboards/rgbkb/pan/pan.c
index 191ff1ac1f..401831e0e2 100644
--- a/keyboards/rgbkb/pan/pan.c
+++ b/keyboards/rgbkb/pan/pan.c
@@ -42,7 +42,7 @@ static inline void setled(int i, uint8_t r, uint8_t g, uint8_t b) {
         rgb_matrix_ws2812_array[i].g = g;
         rgb_matrix_ws2812_array[i].b = b;
     }
-#        ifdef RGBW
+#        ifdef WS2812_RGBW
     convert_rgb_to_rgbw(&rgb_matrix_ws2812_array[i]);
 #        endif
 }
diff --git a/keyboards/westfoxtrot/aanzee/config.h b/keyboards/westfoxtrot/aanzee/config.h
index c024f9d8d9..cd1f84bc1f 100644
--- a/keyboards/westfoxtrot/aanzee/config.h
+++ b/keyboards/westfoxtrot/aanzee/config.h
@@ -17,8 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define RGBW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/westfoxtrot/aanzee/keyboard.json b/keyboards/westfoxtrot/aanzee/keyboard.json
index 7a12a3e52e..898fe9e62b 100644
--- a/keyboards/westfoxtrot/aanzee/keyboard.json
+++ b/keyboards/westfoxtrot/aanzee/keyboard.json
@@ -52,7 +52,8 @@
     }
   },
   "ws2812": {
-    "pin": "E6"
+    "pin": "E6",
+    "rgbw": true
   },
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
diff --git a/platforms/avr/drivers/ws2812_i2c.c b/platforms/avr/drivers/ws2812_i2c.c
index 60b466c32a..86a5ac8394 100644
--- a/platforms/avr/drivers/ws2812_i2c.c
+++ b/platforms/avr/drivers/ws2812_i2c.c
@@ -1,7 +1,7 @@
 #include "ws2812.h"
 #include "i2c_master.h"
 
-#ifdef RGBW
+#ifdef WS2812_RGBW
 #    error "RGBW not supported"
 #endif
 
diff --git a/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c b/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c
index 95a827e4b8..41a5311719 100644
--- a/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c
+++ b/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c
@@ -161,7 +161,7 @@ static void ws2812_dma_callback(void* p, uint32_t ct) {
     // FIFO is already empty.
     rtcnt_t time_to_completion = (pio_sm_get_tx_fifo_level(pio, STATE_MACHINE) + 1) * MAX(WS2812_T1H + WS2812_T1L, WS2812_T0H + WS2812_T0L);
 
-#if defined(RGBW)
+#if defined(WS2812_RGBW)
     time_to_completion *= 32;
 #else
     time_to_completion *= 24;
@@ -222,7 +222,7 @@ void ws2812_init(void) {
     sm_config_set_sideset(&config, 1, false, false);
 #endif
 
-#if defined(RGBW)
+#if defined(WS2812_RGBW)
     sm_config_set_out_shift(&config, false, true, 32);
 #else
     sm_config_set_out_shift(&config, false, true, 24);
@@ -270,7 +270,7 @@ void ws2812_setleds(rgb_led_t* ledarray, uint16_t leds) {
     sync_ws2812_transfer();
 
     for (int i = 0; i < leds; i++) {
-#if defined(RGBW)
+#if defined(WS2812_RGBW)
         WS2812_BUFFER[i] = rgbw8888_to_u32(ledarray[i].r, ledarray[i].g, ledarray[i].b, ledarray[i].w);
 #else
         WS2812_BUFFER[i] = rgbw8888_to_u32(ledarray[i].r, ledarray[i].g, ledarray[i].b, 0);
diff --git a/platforms/chibios/drivers/ws2812_bitbang.c b/platforms/chibios/drivers/ws2812_bitbang.c
index 9ed6bacd5a..96378ec0ac 100644
--- a/platforms/chibios/drivers/ws2812_bitbang.c
+++ b/platforms/chibios/drivers/ws2812_bitbang.c
@@ -101,7 +101,7 @@ void ws2812_setleds(rgb_led_t *ledarray, uint16_t leds) {
         sendByte(ledarray[i].r);
 #endif
 
-#ifdef RGBW
+#ifdef WS2812_RGBW
         sendByte(ledarray[i].w);
 #endif
     }
diff --git a/platforms/chibios/drivers/ws2812_pwm.c b/platforms/chibios/drivers/ws2812_pwm.c
index 7dc3414ead..1e9d2ebb41 100644
--- a/platforms/chibios/drivers/ws2812_pwm.c
+++ b/platforms/chibios/drivers/ws2812_pwm.c
@@ -16,7 +16,7 @@
 
 /* Adapted from https://github.com/joewa/WS2812-LED-Driver_ChibiOS/ */
 
-#ifdef RGBW
+#ifdef WS2812_RGBW
 #    define WS2812_CHANNELS 4
 #else
 #    define WS2812_CHANNELS 3
@@ -262,7 +262,7 @@
 #    define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 0, (bit))
 #endif
 
-#ifdef RGBW
+#ifdef WS2812_RGBW
 /**
  * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given white bit
  *
@@ -381,7 +381,7 @@ void ws2812_write_led_rgbw(uint16_t led_number, uint8_t r, uint8_t g, uint8_t b,
         ws2812_frame_buffer[WS2812_RED_BIT(led_number, bit)]   = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
         ws2812_frame_buffer[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
         ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)]  = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
-#ifdef RGBW
+#ifdef WS2812_RGBW
         ws2812_frame_buffer[WS2812_WHITE_BIT(led_number, bit)] = ((w >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
 #endif
     }
@@ -390,7 +390,7 @@ void ws2812_write_led_rgbw(uint16_t led_number, uint8_t r, uint8_t g, uint8_t b,
 // Setleds for standard RGB
 void ws2812_setleds(rgb_led_t* ledarray, uint16_t leds) {
     for (uint16_t i = 0; i < leds; i++) {
-#ifdef RGBW
+#ifdef WS2812_RGBW
         ws2812_write_led_rgbw(i, ledarray[i].r, ledarray[i].g, ledarray[i].b, ledarray[i].w);
 #else
         ws2812_write_led(i, ledarray[i].r, ledarray[i].g, ledarray[i].b);
diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c
index 5b990ccaa0..ad2e87781c 100644
--- a/platforms/chibios/drivers/ws2812_spi.c
+++ b/platforms/chibios/drivers/ws2812_spi.c
@@ -76,7 +76,7 @@
 #endif
 
 #define BYTES_FOR_LED_BYTE 4
-#ifdef RGBW
+#ifdef WS2812_RGBW
 #    define WS2812_CHANNELS 4
 #else
 #    define WS2812_CHANNELS 3
@@ -131,7 +131,7 @@ static void set_led_color_rgb(rgb_led_t color, int pos) {
     for (int j = 0; j < 4; j++)
         tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.r, j);
 #endif
-#ifdef RGBW
+#ifdef WS2812_RGBW
     for (int j = 0; j < 4; j++)
         tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 4 + j] = get_protocol_eq(color.w, j);
 #endif
diff --git a/quantum/color.c b/quantum/color.c
index 395383f428..96d548a33c 100644
--- a/quantum/color.c
+++ b/quantum/color.c
@@ -109,7 +109,7 @@ RGB hsv_to_rgb_nocie(HSV hsv) {
     return hsv_to_rgb_impl(hsv, false);
 }
 
-#ifdef RGBW
+#ifdef WS2812_RGBW
 void convert_rgb_to_rgbw(rgb_led_t *led) {
     // Determine lowest value in all three colors, put that into
     // the white channel and then shift all colors by that amount
diff --git a/quantum/color.h b/quantum/color.h
index 00a3bfb3f8..b6a9dd0641 100644
--- a/quantum/color.h
+++ b/quantum/color.h
@@ -96,7 +96,7 @@ typedef struct PACKED rgb_led_t {
     uint8_t g;
     uint8_t r;
 #endif
-#ifdef RGBW
+#ifdef WS2812_RGBW
     uint8_t w;
 #endif
 } rgb_led_t;
@@ -111,6 +111,6 @@ typedef struct PACKED HSV {
 
 RGB hsv_to_rgb(HSV hsv);
 RGB hsv_to_rgb_nocie(HSV hsv);
-#ifdef RGBW
+#ifdef WS2812_RGBW
 void convert_rgb_to_rgbw(rgb_led_t *led);
 #endif
diff --git a/quantum/rgb_matrix/rgb_matrix_drivers.c b/quantum/rgb_matrix/rgb_matrix_drivers.c
index 4370996d0e..db3a2ef9e0 100644
--- a/quantum/rgb_matrix/rgb_matrix_drivers.c
+++ b/quantum/rgb_matrix/rgb_matrix_drivers.c
@@ -185,7 +185,7 @@ static inline void setled(int i, uint8_t r, uint8_t g, uint8_t b) {
     rgb_matrix_ws2812_array[i].r = r;
     rgb_matrix_ws2812_array[i].g = g;
     rgb_matrix_ws2812_array[i].b = b;
-#    ifdef RGBW
+#    ifdef WS2812_RGBW
     convert_rgb_to_rgbw(&rgb_matrix_ws2812_array[i]);
 #    endif
 }
diff --git a/quantum/rgblight/rgblight.c b/quantum/rgblight/rgblight.c
index 62137c020b..b0f2dfdc1d 100644
--- a/quantum/rgblight/rgblight.c
+++ b/quantum/rgblight/rgblight.c
@@ -149,7 +149,7 @@ void setrgb(uint8_t r, uint8_t g, uint8_t b, rgb_led_t *led1) {
     led1->r = r;
     led1->g = g;
     led1->b = b;
-#ifdef RGBW
+#ifdef WS2812_RGBW
     led1->w = 0;
 #endif
 }
@@ -652,7 +652,7 @@ void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) {
         led[i].r = r;
         led[i].g = g;
         led[i].b = b;
-#ifdef RGBW
+#ifdef WS2812_RGBW
         led[i].w = 0;
 #endif
     }
@@ -667,7 +667,7 @@ void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index) {
     led[index].r = r;
     led[index].g = g;
     led[index].b = b;
-#ifdef RGBW
+#ifdef WS2812_RGBW
     led[index].w = 0;
 #endif
     rgblight_set();
@@ -704,7 +704,7 @@ void rgblight_setrgb_range(uint8_t r, uint8_t g, uint8_t b, uint8_t start, uint8
         led[i].r = r;
         led[i].g = g;
         led[i].b = b;
-#ifdef RGBW
+#ifdef WS2812_RGBW
         led[i].w = 0;
 #endif
     }
@@ -905,7 +905,7 @@ void rgblight_set(void) {
             led[i].r = 0;
             led[i].g = 0;
             led[i].b = 0;
-#ifdef RGBW
+#ifdef WS2812_RGBW
             led[i].w = 0;
 #endif
         }
@@ -933,7 +933,7 @@ void rgblight_set(void) {
     start_led = led + rgblight_ranges.clipping_start_pos;
 #endif
 
-#ifdef RGBW
+#ifdef WS2812_RGBW
     for (uint8_t i = 0; i < num_leds; i++) {
         convert_rgb_to_rgbw(&start_led[i]);
     }
@@ -1263,7 +1263,7 @@ void rgblight_effect_snake(animation_status_t *anim) {
         ledp->r         = 0;
         ledp->g         = 0;
         ledp->b         = 0;
-#    ifdef RGBW
+#    ifdef WS2812_RGBW
         ledp->w = 0;
 #    endif
         for (j = 0; j < RGBLIGHT_EFFECT_SNAKE_LENGTH; j++) {
@@ -1323,7 +1323,7 @@ void rgblight_effect_knight(animation_status_t *anim) {
         led[i].r = 0;
         led[i].g = 0;
         led[i].b = 0;
-#    ifdef RGBW
+#    ifdef WS2812_RGBW
         led[i].w = 0;
 #    endif
     }
@@ -1337,7 +1337,7 @@ void rgblight_effect_knight(animation_status_t *anim) {
             led[cur].r = 0;
             led[cur].g = 0;
             led[cur].b = 0;
-#    ifdef RGBW
+#    ifdef WS2812_RGBW
             led[cur].w = 0;
 #    endif
         }