qmk_firmware/drivers/sensors/cirque_pinnacle.c

233 lines
7.7 KiB
C
Raw Normal View History

// Copyright (c) 2018 Cirque Corp. Restrictions apply. See: www.cirque.com/sw-license
#include "cirque_pinnacle.h"
#include "print.h"
#include "debug.h"
#include "wait.h"
// Registers for RAP
// clang-format off
#define FIRMWARE_ID 0x00
#define FIRMWARE_VERSION_C 0x01
#define STATUS_1 0x02
#define SYSCONFIG_1 0x03
#define FEEDCONFIG_1 0x04
#define FEEDCONFIG_2 0x05
#define CALIBRATION_CONFIG_1 0x07
#define PS2_AU_CONTROL 0x08
#define SAMPLE_RATE 0x09
#define Z_IDLE_COUNT 0x0A
#define Z_SCALER 0x0B
#define SLEEP_INTERVAL 0x0C
#define SLEEP_TIMER 0x0D
#define PACKET_BYTE_0 0x12
#define PACKET_BYTE_1 0x13
#define PACKET_BYTE_2 0x14
#define PACKET_BYTE_3 0x15
#define PACKET_BYTE_4 0x16
#define PACKET_BYTE_5 0x17
#define ERA_VALUE 0x1B
#define ERA_HIGH_BYTE 0x1C
#define ERA_LOW_BYTE 0x1D
#define ERA_CONTROL 0x1E
// ADC-attenuation settings (held in BIT_7 and BIT_6)
// 1X = most sensitive, 4X = least sensitive
#define ADC_ATTENUATE_1X 0x00
#define ADC_ATTENUATE_2X 0x40
#define ADC_ATTENUATE_3X 0x80
#define ADC_ATTENUATE_4X 0xC0
// Register config values for this demo
#define SYSCONFIG_1_VALUE 0x00
#define FEEDCONFIG_1_VALUE 0x03 // 0x03 for absolute mode 0x01 for relative mode
#define FEEDCONFIG_2_VALUE 0x1C // 0x1F for normal functionality 0x1E for intellimouse disabled
#define Z_IDLE_COUNT_VALUE 0x05
// clang-format on
bool touchpad_init;
uint16_t scale_data = 1024;
void cirque_pinnacle_clear_flags(void);
void cirque_pinnacle_enable_feed(bool feedEnable);
void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count);
void RAP_Write(uint8_t address, uint8_t data);
#ifdef CONSOLE_ENABLE
void print_byte(uint8_t byte) { xprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
#endif
/* Logical Scaling Functions */
// Clips raw coordinates to "reachable" window of sensor
// NOTE: values outside this window can only appear as a result of noise
void ClipCoordinates(pinnacle_data_t* coordinates) {
if (coordinates->xValue < CIRQUE_PINNACLE_X_LOWER) {
coordinates->xValue = CIRQUE_PINNACLE_X_LOWER;
} else if (coordinates->xValue > CIRQUE_PINNACLE_X_UPPER) {
coordinates->xValue = CIRQUE_PINNACLE_X_UPPER;
}
if (coordinates->yValue < CIRQUE_PINNACLE_Y_LOWER) {
coordinates->yValue = CIRQUE_PINNACLE_Y_LOWER;
} else if (coordinates->yValue > CIRQUE_PINNACLE_Y_UPPER) {
coordinates->yValue = CIRQUE_PINNACLE_Y_UPPER;
}
}
uint16_t cirque_pinnacle_get_scale(void) { return scale_data; }
void cirque_pinnacle_set_scale(uint16_t scale) { scale_data = scale; }
// Scales data to desired X & Y resolution
void cirque_pinnacle_scale_data(pinnacle_data_t* coordinates, uint16_t xResolution, uint16_t yResolution) {
uint32_t xTemp = 0;
uint32_t yTemp = 0;
ClipCoordinates(coordinates);
xTemp = coordinates->xValue;
yTemp = coordinates->yValue;
// translate coordinates to (0, 0) reference by subtracting edge-offset
xTemp -= CIRQUE_PINNACLE_X_LOWER;
yTemp -= CIRQUE_PINNACLE_Y_LOWER;
// scale coordinates to (xResolution, yResolution) range
coordinates->xValue = (uint16_t)(xTemp * xResolution / CIRQUE_PINNACLE_X_RANGE);
coordinates->yValue = (uint16_t)(yTemp * yResolution / CIRQUE_PINNACLE_Y_RANGE);
}
// Clears Status1 register flags (SW_CC and SW_DR)
void cirque_pinnacle_clear_flags() {
RAP_Write(STATUS_1, 0x00);
wait_us(50);
}
// Enables/Disables the feed
void cirque_pinnacle_enable_feed(bool feedEnable) {
uint8_t temp;
RAP_ReadBytes(FEEDCONFIG_1, &temp, 1); // Store contents of FeedConfig1 register
if (feedEnable) {
temp |= 0x01; // Set Feed Enable bit
RAP_Write(0x04, temp);
} else {
temp &= ~0x01; // Clear Feed Enable bit
RAP_Write(0x04, temp);
}
}
/* ERA (Extended Register Access) Functions */
// Reads <count> bytes from an extended register at <address> (16-bit address),
// stores values in <*data>
void ERA_ReadBytes(uint16_t address, uint8_t* data, uint16_t count) {
uint8_t ERAControlValue = 0xFF;
cirque_pinnacle_enable_feed(false); // Disable feed
RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Send upper byte of ERA address
RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Send lower byte of ERA address
for (uint16_t i = 0; i < count; i++) {
RAP_Write(ERA_CONTROL, 0x05); // Signal ERA-read (auto-increment) to Pinnacle
// Wait for status register 0x1E to clear
do {
RAP_ReadBytes(ERA_CONTROL, &ERAControlValue, 1);
} while (ERAControlValue != 0x00);
RAP_ReadBytes(ERA_VALUE, data + i, 1);
cirque_pinnacle_clear_flags();
}
}
// Writes a byte, <data>, to an extended register at <address> (16-bit address)
void ERA_WriteByte(uint16_t address, uint8_t data) {
uint8_t ERAControlValue = 0xFF;
cirque_pinnacle_enable_feed(false); // Disable feed
RAP_Write(ERA_VALUE, data); // Send data byte to be written
RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Upper byte of ERA address
RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Lower byte of ERA address
RAP_Write(ERA_CONTROL, 0x02); // Signal an ERA-write to Pinnacle
// Wait for status register 0x1E to clear
do {
RAP_ReadBytes(ERA_CONTROL, &ERAControlValue, 1);
} while (ERAControlValue != 0x00);
cirque_pinnacle_clear_flags();
}
void cirque_pinnacle_set_adc_attenuation(uint8_t adcGain) {
uint8_t temp = 0x00;
ERA_ReadBytes(0x0187, &temp, 1);
temp &= 0x3F; // clear top two bits
temp |= adcGain;
ERA_WriteByte(0x0187, temp);
ERA_ReadBytes(0x0187, &temp, 1);
}
// Changes thresholds to improve detection of fingers
void cirque_pinnacle_tune_edge_sensitivity(void) {
uint8_t temp = 0x00;
ERA_ReadBytes(0x0149, &temp, 1);
ERA_WriteByte(0x0149, 0x04);
ERA_ReadBytes(0x0149, &temp, 1);
ERA_ReadBytes(0x0168, &temp, 1);
ERA_WriteByte(0x0168, 0x03);
ERA_ReadBytes(0x0168, &temp, 1);
}
/* Pinnacle-based TM040040 Functions */
void cirque_pinnacle_init(void) {
#if defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_spi)
spi_init();
#elif defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_i2c)
i2c_init();
#endif
touchpad_init = true;
// Host clears SW_CC flag
cirque_pinnacle_clear_flags();
// Host configures bits of registers 0x03 and 0x05
RAP_Write(SYSCONFIG_1, SYSCONFIG_1_VALUE);
RAP_Write(FEEDCONFIG_2, FEEDCONFIG_2_VALUE);
// Host enables preferred output mode (absolute)
RAP_Write(FEEDCONFIG_1, FEEDCONFIG_1_VALUE);
// Host sets z-idle packet count to 5 (default is 30)
RAP_Write(Z_IDLE_COUNT, Z_IDLE_COUNT_VALUE);
cirque_pinnacle_set_adc_attenuation(0xFF);
cirque_pinnacle_tune_edge_sensitivity();
cirque_pinnacle_enable_feed(true);
}
// Reads XYZ data from Pinnacle registers 0x14 through 0x17
// Stores result in pinnacle_data_t struct with xValue, yValue, and zValue members
pinnacle_data_t cirque_pinnacle_read_data(void) {
uint8_t data[6] = {0};
pinnacle_data_t result = {0};
RAP_ReadBytes(PACKET_BYTE_0, data, 6);
cirque_pinnacle_clear_flags();
result.buttonFlags = data[0] & 0x3F;
result.xValue = data[2] | ((data[4] & 0x0F) << 8);
result.yValue = data[3] | ((data[4] & 0xF0) << 4);
result.zValue = data[5] & 0x3F;
result.touchDown = (result.xValue != 0 || result.yValue != 0);
return result;
}